Select here the right fader for your application/service
We can supply:
60mm travel faders with 80mm mounting distance.
100mm travel faders with 120mm mounting distance.
100mm travel motor faders with 120mm mounting distance.
Stereo logarithmic 10kOhm K-Alps fader Travel 100mm Mounting distance 120mm, M3 thread mouting holesPart number: 10300098
Smooth running 100mm track mixing console fader with mounting distance of 120mm and shaft dimensions of 1.2x8mm. M3 mounting holes. Used in the following mixing consoles: Airmate-(USB), AIRENCE-USB, Clubmix, Orion, Cinemix, Vision, replacement for JP faders in Aircom, Dayner, various Discom models
A start switch (part number 10550016) can be mounted internally or... a complete pcb including the start switch, look up part number 20851245
Mono K-Alps fader lineair 10KOhm, 100mm travel, mounting distance 120mm, M3 thread mounting holesPart number: 10300094
Smooth running 100mm track mixing console fader with mounting distance of 120mm and shaft dimensions of 1.2x8mm. M3 mounting holes. Used in the following mixingconsoles: AIRLAB, Airmix, Scorpius, Airmax, Cinemix to control VCA's
Fader startswitch ALPS for mounting inside K-Alps fader as you can see on the picture.
Part number: 10550016
We optionally deliver the start switch including M2 mounting bolt+nut.
Mounting inside the K-Alps (10300098) is pretty simple.
Stereo N-Alps logaritmic horizontal fader 60mm, mounting distance 80mm. Partnumber: 10300088
Stereo N-Alps logaritmic vertical fader, 60mm travel, mounting distance 80mm.Part number: 10300079
Stereo N-Alps fader Horizonthal 60mm track, mounting distance 80mm.
Not available anymore, sorry
Part number 10300004
Alps-motor RSAON12M9 100mm Fader, mounting distance 120mm for all motor fader consoles we have ever manufactured.
Part number: 10300084
Used in the following mixing consoles: AXUM, Sirius, Cinemix, Octagon.
In earlier models we used motorfaders with an extra, not used audio track, that this model does not have. (also not necessary)
Stereo log N-Alps fader 10kA for Audio. Mounting distance 120mm and 100mm travel.
T shaft only!
Partnumber: 10300003 (no stock anymore, sorry)
N-ALPS 100mm mono Fader for Lyra 10kb, mounting distance 80mm.
Part number: 10300005
Stereo linear N-Alps fader 10kB for controlling VCA's. Mounting distance 120mm and 100mm travel.
Part number: 10300006
Used in the following products: AIRLITE-USB and WEBSTATION